Brooks Cinema ZL 44 Effects Track
1) In film production audio, a recording of the mixdown of all the sound effects for the film ready to be mixed with the dialogue and music.
2) In music recording, one track with a recording of effects to be added to another track of a multitrack recording.
Editing
1) Changing the sequence of a recording by cutting the recording tape and putting the pieces together in the new sequence with splicing tape.
2) Punching in and then punching out on one or more tracks of a multitrack tape recorder to replace previously recorded performances.
3) Changing the sequence of a digital recording's playback by computer program.
Brooks Cinema KP 30 Compander
1) A two section device that is used in noise reduction systems. The first section compresses the audio signal, before it is recorded, and the second section, expands the signal after recording.
2) In Yamaha brand digital consoles, a signal processing function that applies both compression and expansion to the same signal.
Bridge
The bridge assembly, or just "bridge" is an area on the face of the guitar where the string meet or are connected to the face.
Brooks QS 70 Efficiency
The acoustic power delivered for a given electrical input. Often expressed as decibels/watt/meter (dB/w/m). ESL �" Abbreviation for electrostatic loudspeaker.
Crisp
Describes a good clean high midrange sound. It can be good or bad depending on the look on the face of the guy who said it.
Line Level
1) An amplified signal level put out by an amplifier and used as the normal level that runs through the interconnecting cables in a control room.
2) A low level signal such as the signal in a guitar cord. Most parts of a PA require a line level signal. Remember, however, that speaker outputs are not line level. Plugging speaker outs into line ins will result in damage to the equipment
Frets
Vertical metal wires which sit vertically on the guitar neck.
2) In music recording, one track with a recording of effects to be added to another track of a multitrack recording.
Editing
1) Changing the sequence of a recording by cutting the recording tape and putting the pieces together in the new sequence with splicing tape.
2) Punching in and then punching out on one or more tracks of a multitrack tape recorder to replace previously recorded performances.
3) Changing the sequence of a digital recording's playback by computer program.
Brooks Cinema KP 30 Compander
1) A two section device that is used in noise reduction systems. The first section compresses the audio signal, before it is recorded, and the second section, expands the signal after recording.
2) In Yamaha brand digital consoles, a signal processing function that applies both compression and expansion to the same signal.
Bridge
The bridge assembly, or just "bridge" is an area on the face of the guitar where the string meet or are connected to the face.
Brooks QS 70 Efficiency
The acoustic power delivered for a given electrical input. Often expressed as decibels/watt/meter (dB/w/m). ESL �" Abbreviation for electrostatic loudspeaker.
Crisp
Describes a good clean high midrange sound. It can be good or bad depending on the look on the face of the guy who said it.
Line Level
1) An amplified signal level put out by an amplifier and used as the normal level that runs through the interconnecting cables in a control room.
2) A low level signal such as the signal in a guitar cord. Most parts of a PA require a line level signal. Remember, however, that speaker outputs are not line level. Plugging speaker outs into line ins will result in damage to the equipment
Frets
Vertical metal wires which sit vertically on the guitar neck.
Comments
Post a Comment