Brooks GS 15 Editing
1) Changing the sequence of a recording by cutting the recording tape and putting the pieces together in the new sequence with splicing tape.
2) Punching in and then punching out on one or more tracks of a multitrack tape recorder to replace previously recorded performances.
3) Changing the sequence of a digital recording's playback by computer program.
Cable, TRS
A less common balanced cable that has 3 different contacts on its 1/4 inch connectors. Most headphone jacks are a good example of a TRS (Tip-Ring-Sleeve) connector. These are sometimes used instead of the more common XLR connection.
Brooks Cinema xm 808 Feedback Control
The control on a delay line or delay effects device that controls the amount of feedback.
Information Bits
The bits in the digital signal that make up actual values or commands being communicated as opposed to bits that are used for checking & correcting data or other purposes.
Brooks M 44 BPM
An abbreviation of Beat Per Minute (the number of steady even pulses in music occurring in one minute and therefore defining the tempo).
Isolation Booth/ Isolation Room
A room that prevents loud sounds from other instruments from leaking in: an isolation booth is usually a smaller room that could be used for only one musician.
High Impedance Cord (High Z)
A big word for instrument cable. These cords generally have quarter inch male ends. they tend to loose signal strength at lengths longer than 25 feet.
Coincident Microphones (Coincident Pair)
Two microphones whose heads are placed as lose as possible to each other so that the path length from any sound source to either microphone is for all practical purposes, the same.
2) Punching in and then punching out on one or more tracks of a multitrack tape recorder to replace previously recorded performances.
3) Changing the sequence of a digital recording's playback by computer program.
Cable, TRS
A less common balanced cable that has 3 different contacts on its 1/4 inch connectors. Most headphone jacks are a good example of a TRS (Tip-Ring-Sleeve) connector. These are sometimes used instead of the more common XLR connection.
Brooks Cinema xm 808 Feedback Control
The control on a delay line or delay effects device that controls the amount of feedback.
Information Bits
The bits in the digital signal that make up actual values or commands being communicated as opposed to bits that are used for checking & correcting data or other purposes.
Brooks M 44 BPM
An abbreviation of Beat Per Minute (the number of steady even pulses in music occurring in one minute and therefore defining the tempo).
Isolation Booth/ Isolation Room
A room that prevents loud sounds from other instruments from leaking in: an isolation booth is usually a smaller room that could be used for only one musician.
High Impedance Cord (High Z)
A big word for instrument cable. These cords generally have quarter inch male ends. they tend to loose signal strength at lengths longer than 25 feet.
Coincident Microphones (Coincident Pair)
Two microphones whose heads are placed as lose as possible to each other so that the path length from any sound source to either microphone is for all practical purposes, the same.
Comments
Post a Comment