Brooks Cinema XS - 45 I/O
Short for "Input/Output' and referring to:
1) An in-line console module that contains controls for the input section, output section and monitor section.
2) A module in electronic gear containing input and output amplifiers for the device.
3) A digital port (connector) able to both receive digital data and output digital data.
Electric Current
A more formal term meaning the same as the term Current (the amount of electron charge passing a point in a conductor per unit of time).
Brooks SS 81 Harmonics
Integer multiples of a fundamental frequency, the fundamental itself being the first harmonic, its first overtone the second harmonic, etc. Attributing to instruments, voices, etc. their distinctive timbre.
Electrostatic Charge
The excess or deficiency of electrons in a given area.
Brooks Cinema KM 22 Chase
The automatic adjusting of the speed of a recorder (or sequencer) to be time with another recorder.
Crossover
1) A route leading from one side of the stage to the other, out of the audiences view.
2) An electronic filter in a sound system that routes sound of the correct frequency to the correct part of the speaker system. Different speakers handle high frequencies (tweeters) and low frequencies (woofers). Sometimes known as a crossover network. An active crossover splits the signal from the mixing desk into high, mid and low frequencies which are then sent to three separate amplifiers.
3) An electrical circuit that divides a full bandwidth signal into the desired frequency bands for the loudspeaker components.
Head
1) In tape recording, the transducer (energy converter) that changes the audio energy from electrical energy to magnetic energy and back; also the devices that apply magnetism to the recording tape for other purposes such as in the erase head.
2) The part of a device that immediately includes the transducer to change sound or audio signals from one energy form to another.
Dynamic Mic
Robust type of microphone which picks up the sound on a diaphragm connected to a coil of wire which moves within a magnet. An alternating current is induced into the wire which provides the electrical output. Most dynamic mics have low output impedance of 200 Ohms. See Condenser Mic.
1) An in-line console module that contains controls for the input section, output section and monitor section.
2) A module in electronic gear containing input and output amplifiers for the device.
3) A digital port (connector) able to both receive digital data and output digital data.
Electric Current
A more formal term meaning the same as the term Current (the amount of electron charge passing a point in a conductor per unit of time).
Brooks SS 81 Harmonics
Integer multiples of a fundamental frequency, the fundamental itself being the first harmonic, its first overtone the second harmonic, etc. Attributing to instruments, voices, etc. their distinctive timbre.
Electrostatic Charge
The excess or deficiency of electrons in a given area.
Brooks Cinema KM 22 Chase
The automatic adjusting of the speed of a recorder (or sequencer) to be time with another recorder.
Crossover
1) A route leading from one side of the stage to the other, out of the audiences view.
2) An electronic filter in a sound system that routes sound of the correct frequency to the correct part of the speaker system. Different speakers handle high frequencies (tweeters) and low frequencies (woofers). Sometimes known as a crossover network. An active crossover splits the signal from the mixing desk into high, mid and low frequencies which are then sent to three separate amplifiers.
3) An electrical circuit that divides a full bandwidth signal into the desired frequency bands for the loudspeaker components.
Head
1) In tape recording, the transducer (energy converter) that changes the audio energy from electrical energy to magnetic energy and back; also the devices that apply magnetism to the recording tape for other purposes such as in the erase head.
2) The part of a device that immediately includes the transducer to change sound or audio signals from one energy form to another.
Dynamic Mic
Robust type of microphone which picks up the sound on a diaphragm connected to a coil of wire which moves within a magnet. An alternating current is induced into the wire which provides the electrical output. Most dynamic mics have low output impedance of 200 Ohms. See Condenser Mic.
Comments
Post a Comment