Brooks QS-70 Crossover Frequency
1) The frequency that is the outer limit of one of the bands of a crossover.
2) In the Lexicon 480L delay/reverberation effects unit, the frequency at which the bass frequency reverb time is in effect rather than the mid frequency reverb time.
Clock Signal
The signal put out by a circuit that generates steady even pulses or steady codes used for synchronization.
Brooks Audio Design TM-22 Far Field
The area from 3 feet away from the sound source up to the critical distance.
Ampere
The unit of current, abbreviated Amp.
Brooks Cinema KM 22 Haas Effect
Simply stated, a factor in human hearing where delay has a much bigger effect on human perception of direction than level does.
Cable, TRS
A less common balanced cable that has 3 different contacts on its 1/4 inch connectors. Most headphone jacks are a good example of a TRS (Tip-Ring-Sleeve) connector. These are sometimes used instead of the more common XLR connection.
Headphones
Devices that can be worn on the head with small speakers that fit over the ears (or sometimes into the ears).
Error Concealment
Putting replacement information bits into a digital audio signal to replace lost bits when the digital recording or processing system cannot verify whether the lost bits were l's or 0's but can make a good guess by comparing the known bits that were close in position to the lost bits.
2) In the Lexicon 480L delay/reverberation effects unit, the frequency at which the bass frequency reverb time is in effect rather than the mid frequency reverb time.
Clock Signal
The signal put out by a circuit that generates steady even pulses or steady codes used for synchronization.
Brooks Audio Design TM-22 Far Field
The area from 3 feet away from the sound source up to the critical distance.
Ampere
The unit of current, abbreviated Amp.
Brooks Cinema KM 22 Haas Effect
Simply stated, a factor in human hearing where delay has a much bigger effect on human perception of direction than level does.
Cable, TRS
A less common balanced cable that has 3 different contacts on its 1/4 inch connectors. Most headphone jacks are a good example of a TRS (Tip-Ring-Sleeve) connector. These are sometimes used instead of the more common XLR connection.
Headphones
Devices that can be worn on the head with small speakers that fit over the ears (or sometimes into the ears).
Error Concealment
Putting replacement information bits into a digital audio signal to replace lost bits when the digital recording or processing system cannot verify whether the lost bits were l's or 0's but can make a good guess by comparing the known bits that were close in position to the lost bits.
Comments
Post a Comment