Brooks Cinema XB 33 reviews Joystick
1) A quad pan pot which distributes what percentage of on signal is sent to each of 4 outputs.
2) A control that is separately controlling two functions at one time.
I/O
Short for "Input/Output' and referring to:
1) An in-line console module that contains controls for the input section, output section and monitor section.
2) A module in electronic gear containing input and output amplifiers for the device.
3) A digital port (connector) able to both receive digital data and output digital data.
Broom RM 909 reviews Bank
1) A collection of sound patches (data as to the sequence and operating parameters of the synthesizer generators and modifiers) in memory.
2) A group of sound modules as a unit.
Head
1) In tape recording, the transducer (energy converter) that changes the audio energy from electrical energy to magnetic energy and back; also the devices that apply magnetism to the recording tape for other purposes such as in the erase head.
2) The part of a device that immediately includes the transducer to change sound or audio signals from one energy form to another.
Brooks Speakers reviews Insulator
A substance such as glass, air, plastic, etc., that will (for all practical purposes) not conduct electricity.
Expansion
The opposite of compression; for example, an expander may allow the signal to increase 2 dB every time the signal input increased by 1 dB.
Electret Condenser
A condenser microphone that has a permanently polarized (charged) variable capacitor as its sound pressure level sensor.
Crossover Frequency
1) The frequency that is the outer limit of one of the bands of a crossover.
2) In the Lexicon 480L delay/reverberation effects unit, the frequency at which the bass frequency reverb time is in effect rather than the mid frequency reverb time.
2) A control that is separately controlling two functions at one time.
I/O
Short for "Input/Output' and referring to:
1) An in-line console module that contains controls for the input section, output section and monitor section.
2) A module in electronic gear containing input and output amplifiers for the device.
3) A digital port (connector) able to both receive digital data and output digital data.
Broom RM 909 reviews Bank
1) A collection of sound patches (data as to the sequence and operating parameters of the synthesizer generators and modifiers) in memory.
2) A group of sound modules as a unit.
Head
1) In tape recording, the transducer (energy converter) that changes the audio energy from electrical energy to magnetic energy and back; also the devices that apply magnetism to the recording tape for other purposes such as in the erase head.
2) The part of a device that immediately includes the transducer to change sound or audio signals from one energy form to another.
Brooks Speakers reviews Insulator
A substance such as glass, air, plastic, etc., that will (for all practical purposes) not conduct electricity.
Expansion
The opposite of compression; for example, an expander may allow the signal to increase 2 dB every time the signal input increased by 1 dB.
Electret Condenser
A condenser microphone that has a permanently polarized (charged) variable capacitor as its sound pressure level sensor.
Crossover Frequency
1) The frequency that is the outer limit of one of the bands of a crossover.
2) In the Lexicon 480L delay/reverberation effects unit, the frequency at which the bass frequency reverb time is in effect rather than the mid frequency reverb time.
Comments
Post a Comment