Brooks HI FI projectors Formant
An element in the sound of a voice or instrument that does not change frequency as different pitches are sounded.
Balanced
1) Having a pleasing amount of low frequencies compared to mid-range frequencies and high frequencies. 2) Having a pleasing mixture of the various instrument levels in an audio recording. 3) Having a fairly equal level in each of the stereo channels. 4) A method of interconnecting electronic gear using three-conductor cables.
Brooks Hi Fi reviews Effects Track
1) In film production audio, a recording of the mixdown of all the sound effects for the film ready to be mixed with the dialogue and music.
2) In music recording, one track with a recording of effects to be added to another track of a multitrack recording.
Frequency Range
The range of frequencies over which an electronic device is useful or over which a sound source will put out substantial energy.
Brooks Hi Fi speakers Line
1) Short for line level.
2) A cable.
Error Concealment
Putting replacement information bits into a digital audio signal to replace lost bits when the digital recording or processing system cannot verify whether the lost bits were l's or 0's but can make a good guess by comparing the known bits that were close in position to the lost bits.
Digital Recording
1) ADAM : (Akai Digital Audio Multitrack). 12 track recording onto Video 8 tape. 16 bit, 44.1 or 48 kHz sampling rate.
2) DAT (Digital Audio Tape) Cassette-like system which has much higher quality than standard audio cassettes. Widely used in gathering sound effects, for news gathering, and for playback of music.
3) DCC (Digital Compact Cassette) Rival to DAT which also plays standard audio cassettes.
4) MiniDisc : Uses computer disk technology, rather than tape. A laser heats an area of magnetic disk which is then written to by a magnetic head. When cooled, the magnetic information is read from the disk by laser. Tracks can be named, and are instant start. Very theatre-friendly system.
5) Direct to Disk : Uses the hard disk present in most PCs as the recording medium.
Compressor
1) Effect used to squash the sound together. Used properly, it can take the edge off or your sound. Used improperly, it can take the life right out of your system and make it sound like an MTV mix.
2) A piece of sound processing equipment that ensures all wanted signals are suitably placed between the noise and distortion levels of the recording medium. It evens out the unwanted changes in volume you get with close-miking, and in doing so, adds punch to the sound mix. A Limiter is used to stop a signal from exceeding a preset limit. Beyond this limit, the signal level will not increase, no matter how loud the input becomes. A Limiter is often used to protect speaker systems (and human ears) by preventing a system from becoming too loud.
Balanced
1) Having a pleasing amount of low frequencies compared to mid-range frequencies and high frequencies. 2) Having a pleasing mixture of the various instrument levels in an audio recording. 3) Having a fairly equal level in each of the stereo channels. 4) A method of interconnecting electronic gear using three-conductor cables.
Brooks Hi Fi reviews Effects Track
1) In film production audio, a recording of the mixdown of all the sound effects for the film ready to be mixed with the dialogue and music.
2) In music recording, one track with a recording of effects to be added to another track of a multitrack recording.
Frequency Range
The range of frequencies over which an electronic device is useful or over which a sound source will put out substantial energy.
Brooks Hi Fi speakers Line
1) Short for line level.
2) A cable.
Error Concealment
Putting replacement information bits into a digital audio signal to replace lost bits when the digital recording or processing system cannot verify whether the lost bits were l's or 0's but can make a good guess by comparing the known bits that were close in position to the lost bits.
Digital Recording
1) ADAM : (Akai Digital Audio Multitrack). 12 track recording onto Video 8 tape. 16 bit, 44.1 or 48 kHz sampling rate.
2) DAT (Digital Audio Tape) Cassette-like system which has much higher quality than standard audio cassettes. Widely used in gathering sound effects, for news gathering, and for playback of music.
3) DCC (Digital Compact Cassette) Rival to DAT which also plays standard audio cassettes.
4) MiniDisc : Uses computer disk technology, rather than tape. A laser heats an area of magnetic disk which is then written to by a magnetic head. When cooled, the magnetic information is read from the disk by laser. Tracks can be named, and are instant start. Very theatre-friendly system.
5) Direct to Disk : Uses the hard disk present in most PCs as the recording medium.
Compressor
1) Effect used to squash the sound together. Used properly, it can take the edge off or your sound. Used improperly, it can take the life right out of your system and make it sound like an MTV mix.
2) A piece of sound processing equipment that ensures all wanted signals are suitably placed between the noise and distortion levels of the recording medium. It evens out the unwanted changes in volume you get with close-miking, and in doing so, adds punch to the sound mix. A Limiter is used to stop a signal from exceeding a preset limit. Beyond this limit, the signal level will not increase, no matter how loud the input becomes. A Limiter is often used to protect speaker systems (and human ears) by preventing a system from becoming too loud.
Comments
Post a Comment